Tally Genicom 6600 Select Format (SF) Command , (Normal, Create, and Execute)

200
Chapter 9 PGL Commands
Select Format (SF) Command
(Normal, Create, and Execute)
These commands allow you to configure PGL to ignore c haracters from 00 to
0F Hex. This enables the printer to ignore all host-generated paper movement
commands.
When SF Mode is activated you may still send paper moveme nt commands
by using one of the following commands.
Enter Result
CR Carriage Return
LF Line Feed
FF Form Feed
These commands will have no effect after the SFOFF Command has been
sent.
Tabl e 37. Set Format Commands
Field Function Option/Modifier Selections
SFON
SFON Turns Select Format Mode on. The
printer ignores all characters from
00 to 0F Hex until it receives the
SFOFF sequence.
Enter the current Special Function Control
Character followed by SFON.
SFOFF
SFOFF Turns Select Format Mode off. The
printer begins processing normally.
Enter the current Special Function Control
Character followed by SFOFF.