Tally Genicom 6600 manual Number Command Create, PGL Commands

Chapter 9 PGL Commands

Page Number Command (Create)

This command allows you to place an automatically incremented page number on each page in a specific location. The format for this command is:

Table 14. Page Number Command

Field	Function	Option/Modifier Selections
PAGE;	Command Specifier	Enter PAGE

SR and SC parameters define the starting location of the page number. Whether in columns or dots depends on the SCALE Command. You may also use the XX.YY format for plotting duplication print locations explained earlier in the Standards Section.

SR;	Plots the starting row of the page	Enter a value ranging from 1 to one less
	number.	than the maximum form length.
SC	Plots the starting column of the	Enter a value ranging from 1 to one less
	page number.	than the maximum form width.

The printer automatically increments the page numbers starting from the page number specified in the EXECUTE command. If a page number is not specified in EXECUTE command, no page number will print.

170