Tally Genicom 6600 manual Multiple Repeat Commands

Multiple Repeat Commands

^iREPV,2,070^G

Specifies a Vertical Repeat twice at 0.7 inches separation.

^IREPH,3,100^G

Specifies a Horizontal Repeat three times with a separation of 1 inch.

^M0101000abc^-

First Graphics Pass with data and Pass Terminator.

^IREPV,2,000^G

Specifies a Vertical Repeat of two more times with no separation.

NOTE: Although the ^IREPV command specifies 0 inches of vertical separation between the repeated pass def, the def strings appear on separate lines because of the ^- Pass Terminator.

^M101000def^-Second Graphics Pass with data and Pass Terminator.

Example 2: This example has three levels. The nested repeat commands:

^IREPV,2,050^G ^M0101000Level A^-^* ^IREPH,2,150^G ^M0101000^T003Level B^-^* ^IREPV,3,020^G ^M0101000^T005Level C^-^* ^IREPE^-

^IREPE^-

prints:

93