Reverse Print Command (Create)
171
Reverse Print Command (Create)
This command allows you to define an area on a form where reverse printing
(white ouput on black background) will be output.
Reverse printing cannot be used with OCR Characters or Overlay Data.
Tabl e 15. Reverse Command
Field Function Option/Modifier Selections
REVERSE This is the command specifier.
Using the following parameters a
field of reverse printing will be
defined for a location on a form.
Enter REVERSE
D;
Dark Printing
Optional parameter for changing
horizontal dot density from 60 DPI
to 120 DPI.
Enter D; or DARK; to select this option.
The SR, SC, ER, and EC parameters use the same methods for defin ing the REVERSE Print
area. Whether in columns or dots depends on the SCALE Command. You may also use the
XX.YY format for plotting duplication print locations explained earlier in t he Standards Section.
SR; Plots the starting ROW of the field. Enter a value rang ing from 1 to one less
than the maximum form length and the
delimiter.
SC; Plots the starting COLUMN of the
field.
Enter a value ranging from 1 to one less
than the maximum form width and the
delimiter.
ER; Plots the ending ROW of the field.
The ending row must be greater
than the starting row.
Enter a range ranging from 2 to one less
than the maximum form length and the
delimiter.
EC Plots the ending COLUMN of the
field. The ending column must be
greater than the starting column.
Enter a value ranging from 2 to the
maximum form width.
STOP Command Terminator. Enter STOP and the printer waits for a new
command. Leave it out and the printer will
wait for another REVERSE Command.