Tally Genicom 6600 manual Predefined Forms, Aiag Forms

AIAG Forms

Predefined Forms

Code V comes with the following two predefined forms already stored in permanent memory:

•AIAG form

•Preliminary Metals form

The barcode portions of these predefined forms can be printed at either 120 DPI high density or 60 DPI low density. However, the Halfdot Mode reduces print speed by approximately 50% during the printing of the barcode(s).

The predefined forms reside in the printer ROM. If a predefined form is used, it is copied from ROM into the Heap Buffer RAM. The amount of RAM being used ca be determined by executing the IFORM,L command. If the amount of the RAM becomes insufficient for the creation of new forms, the predefined forms can be deleted from RAM similar to user-defined forms using ^IFORM,D or ^IFORM,R.

AIAG Forms

The AIAG (Automotive Industry Action Group) form is a cretion of automotive industry that utilizes both barcode and human-readable characters to create a standardized label for shipping and identification. The CVCC contains high density and low density versions of the AIAG form in ROM. The names of these forms are:

•AIAG_H.MT for low density.

•AIAG_F.MT for high density.

The following rules apply when using the AIAG forms:

1.If one of the data fields is not completely filled with data, the remaining characers for that field must end with ^-, ^*, or ^+.

2.If the data field requires both a human-readable field and a barcode field, the same value must be sent for both fields.

109