Tally Genicom 6600 Aiag, Embarc, Hibcc, Logmar, Cbar, MSI10, INT2/5A, Upca, Upce, UPCE0, UPCE1

Barcode Version 2

<data>	The alphanumeric characters to be encoded.
^G	Command Terminator

Table 3 shows the available barcode styles and associated indices:

Table 3. Valide Barcode Symbologies

Version 1	Version 2	Description	Check Digits	Ratio*
Index	Index
---	AIAG	Code 39	None	1:1:3:3
---	EMBARC	Code 39	None	1:1:3:3
---	HIBCC	Code 39	Mod 43	1:1:3:3
A	C39	Code 39	None	1:1:3:3
---	LOGMAR	Code 39	None	1:1:3:3
B	C39A	Code 39	None	1:2:4:5
C	C39M43	Code 39	Mod 43	1:1:3:3
D	CBAR	Codabar	None	1:2:3:4:1:1:1:1
E	---	Identicon 2/5	None	1:2:3;2
F	MSI	MSI	None	1:1:2:2
G	MSI10	MSI	Mod 10	1:1:2:2
H	MSI1010	MSI	Mod 10/10	1:1:2:2
K	INT2/5	Interleaved 2/5	None	1:1:3:3
L	INT2/5A	Interleaved 2/5	None	1:2:4:5
P	UPCA	UPCA 11 digit	Mod 10	1:1:2:2:3:3:4:4
Q	UPCE	UPCE 10 digit	Mod 10	1:1:2:2:3:3:4:4
R	UPCE0	UPCE0 6 digit	Mod 10	1:1:2:2:3:3:4:4
S	UPCE1	UPCE1 6 digit	Mod 10	1:1:2:2:3:3:4:4
T	EAN13	EAN 13 digit	Mod 10	1:1:2:2:3:3:4:4
U	EAN8	Ean 8 digit	Mod 10	1:1:2:2:3:3:4:4
Z	C128	Code 128	Pseudo 103	1:1:2:2:3:3:4:4

*These ratio numbers are to be read in pairs. They refer to the relative ratios of the widths of the bars and gaps in barcode characters and correspond to narrow bar/narrow gap, wide bar/wide gap, respectively. For example, the first two numbers (1:2) in the INT2/5A barcode style indicates 1 unit for the narrow bar width and 2 units for the narrow gap. These units are measured in dot- columns for horizontal barcodes and dot rows for vertical barcodes.

65