Tally Genicom 6600 manual Primary Metals Form

Primary Metals Form

which prints:

Primary Metals Form

Similar to the AIAG form, the Primary Metals form utilizes both barcode and human-readable characters to create a standard label for shipping and identification. The barcode portions of this form can be printed in either the High Density or Low Density mode:

The command to select Half Dot Mode is METALS_H.MT.

The command to select Full Dot Mode is METALS_F.MT.

The following rules apply when using the METALS forms:

1.If a data field is not completely filled with data, the data for that field must be terminated with ^-, ^*, or ^+.

2.If the data field requires both a human-readable field and a barcode field, the same value must be sent for both fields.

111