Tally Genicom 6600 manual Codes EAN 8 and EAn 13 Data Fields, Interleaved 2/5 I-2/5 Data Fields

Data Field Characters

Table 41. Code 128B Character Set

Character	HEX Value	Character	HEX Value	Character	HEX Value
6	36	]	5D	}	7D
7	37	^	5E	~	7E
8	38	_	5F	DEL	7F
9	39	‘	60	FNC1	21
A	41	a	61	FNC2	22
B	42	b	61	FNC3	23
C	43	c	63	FNC4	24
D	44	d	64	CODEA	25
E	45	e	65	CODEC	27
F	46	f	66	SHIFT	28

To access the codes in the greyscale area of the table you must send a SO (OE) character followed by the HEX value for the desired code.

Code 128C character set includes Start B code (HEX 26).

Codes EAN 8 and EAn 13 Data Fields

The required field length for EAN 8 Barcodes is seven characters and the required field length for EAn 13 Barcodes is 12 characters. If the data field is too long or too short, an error message along with the offending program code will print in the place of the barcode. The data fields for EAN 8 and EAN 13 Barcodes can be comprised of the numeric characters 0-9 and special start, stop, and center codes.

Interleaved 2/5 (I-2/5) Data Fields

The data field length for I-2/5 Barcodes is variable, however it is best to limit field length to no more than 32 characters to minimize the potential for scanning errors. In addition, the I-2/5 Barcode requires an even number of characters in its data field. If an odd number of characters is sent the printer automatically adds a leading zero to even out the field. The data field for Interleaved 2/5 Barcodes can be comprised of the numeric characters 0-9.

MSI Data Fields

MSI data fields are variable in length up to a maximum of 14 if one check digit is used and 13 if two check digits are used. The data field for MSI Barcodes can be comprised of the numeric characters 0-9.

213