38
Chapter 2 Block Character Fonts
10 CPI
The 10 CPI block character set is 0.1 inches high and is se lected by using the
following Graphics Pass Command.
Command ^{M,U,V,E}0101jjd<data>^-
Arguments
^{M,U,V,E} One of four Graphics Pass orientations (^M for
horizontal, ^V for clockwise rotation, ^E for
counterclockwise rotation, or ^U for upside down
and reverse order of characters).
0101 A height/width val ue of 0101 specifies 10 CPI
characters.
jjd Justification values in increments of 0.1 inches
(0.25 cm) and dot rows as discussed in the
Graphics Pass Command description below. This
field may be omitted entirely if the justification value
is zero.
<data> The characters to be printed.
Example 1:The Graphics Pa ss ^M0101000HORIZONTAL 10 CPI^- prints:
Example 2:^M0101000HORIZONTA L 10 CPI
^M0202000HORIZONTAL 5 CPI^- prints: