Tally Genicom 6600 Exit CREATE Mode (Create), EXECUTE Mode (Normal)

172
Chapter 9 PGL Commands
Exit CREATE Mode (Create)
To exit the CREATE mode after creating your image, enter the following
command:
END
When the printer receives this command it stores the work you have done and
returns to NORMAL Mode.
EXECUTE Mode (Normal)
To use the commands listed above to execute printing of a form you must first
enter EXECUTE Mode. To assist in composing the various parameters that
can be used with the EXECUTE Form Command, the basic comm and is
provided again.
The basic command to enter EXECUTE Mode is:
First send the EXECUTE Command