Tally Genicom 6600 manual Barcode Version

Barcode Version 2

Example 3: Example 2 may be printed with the human-readable characters embedded in the barcode by replacing B with an E as shown below: ^M0505000^IBARC,C39,E,12345^G^- prints:

^M0505000	Sets up horizontal orientation and sets the barcode
	height to 0.5 inches.
^IBARC,	Turns ON the Barcode Mode.
C39,	Selects the first barcode style in Table 3, page 65,
	(Code 39).
E,	Embeds human-readable characters at the bottom
	of the barcode.
12345	The data to be encoded as a barcode and printed
	as human readable characters.
^G	Command Terminator

Example 4: The human-readable character translation printed below or embedded in a barcode may be printed in any of the fonts available with the IFONT command. The command sequence ^M0505000^IFONT,S,1^G^IBARC,C128,B,Rusty Old Car^G^- prints:

^M0505000 Sets up horizontal orientation and sets the barcode height to 0.5 inches.

^IFONT,S,1^GSets font to be Draft at 10 CPI.

^IBARC	Turns ON the Barcode Mode.
C128	Selects Code 128 (see Table 3, page 65).

BPrint human-readable characters below the barcode.

Rusty Old Car

The data to be encoded as a barcode with human- readable characters.

^G Command Terminator

67