Tally Genicom 6600 manual Appendix L 20 CPI Support In PGL

Appendix L 20 CPI Support In PGL

20 CPI Support In PGL

20 CPI text can now be selected from the ALPHA and DENSITY commands. Use C20 in the ALPHA command and 20 in the DENSITY command.

SCALE Command Modifications In PGL

The SCALE command has been modified in the following manner:

Field	Function	Option/Modifier
		Selections
Dot Scale Placement
SCALE;	This is the command	Command Identifier
	specifier.
DOT	Specifies that placement	Enter DOT to specify a dot
	will be done using a	measurement scale
	dot-scale.	(dot-columns and dot-
		rows).
;HORZ	An optional parameter that	Enter the horizontal DPI.
	specifies the horizontal	No value will result in the
	DPI used to place	default setting of 60.
	elements on the form.
;VERT	An optional parameter that	Enter the vertical DPI. No
	specifies the vertical DPI	value will result in the
	used to place elements on	default setting of 72.
	the form.
Character Scale Placement
SCALE;	This is the command	Command Identifier
	specifier.
CHAR	Specifies that placement	Enter CHAR to specify a
	will be done using a	character measurement
	character-scale.	scale (columns and rows).
;LPI	An optional parameter that	Selections that can be
	can be used to specify	used are 6, 8, 9, 10, 12,
	Lines Per Inch settings for	and 15. No value will
	print output.	result in the default setting
		of 6 LPI.
;CPI	An optional parameter that	Selections that can be
	can be used to specify	used are 10, 12, 13, 15,
	Characters Per Inch	17, and 20. No value will
	settings for print output.	result in the default setting
		of 10 CPI.

318