Tally Genicom 6600 manual Pixel Expansion, Version 2 logos, Ilogo, Ipexp

Version 2 logos

Version 2 logos

The Version 2 logo command prints all logos. The logo command must occur within a Graphics Pass.

Command ^ILOGO,d,nn^G

Arguments

^ILOGO	Version 2 logo command
d	Density: H=high, L=low

nnA hex number indicating the logo to be used.

See Appendix C, “Logos” on page 271 for a listing of logo numbers.

^G Command Terminator

NOTE: If “d” is left out, density defaults are low.

Example: The command ^M0202000^ILOGO,L,43^G^U0202000^ILOGO,L,43^G ^V0202000^ILOGO,L43^G^E0202000^ILOGO,L,43^G^- prints:

Pixel Expansion

The Pixel Expansion command expands logos, fonts, and plot data up to 255 times their original size. The Pixel Expansion command remains in effect until a new Pixel Expansion command is received. To turn Pixel Expansion on, send the following code.

Command ^IPEXP,h,v^G

Arguments

^IPEXP The Pixel Expansion command

hRepresents the horizontal Pixel Expansion value, which ranges from 1 to 255.

vRepresents the vertical Pixel Expansion value, which ranges from 1 to 255.

^G Command Terminator

Example 1: The code ^M0101000^ILOGO,L45^G^- prints the UL symbol in its original size.

59