Half Space Font Mode

Half Space Font Mode

Selects 60 DPI, fast speed, lowest quality fonts. The paper will not back up to print any GPL font (excluding OCR) when ^~FH is selected.

Command ^~FH

Lines Per Inch

The number of character lines per inch may be set with the command:

Command ^@Lnn

Arguments

^@L

The Lines Per Inch Command.

nnOne of the lines per inch numbers below:

03 = 3 LPI

04 = 4 LPI

06 = 6 LPI

08 = 8 LPI

Dump Mode

The data received from the host may be printed in hexadecimal Dump Mode format using the Dump Mode command. Dump Mode is typically used to examine the data received from the host.

NOTE: Dump Modes are explained on page 45.

Command ^@Hn

Arguments

^@H

The Dump Mode Command

nMode selection

0 or 1 selects Control Panel Dump Mode style 1. 2 selects Control Panel Dump Mode style 2.

3 selects Control Panel Dump Mode style 3.

Hex Command

The Hex Command allows the user to send single hexadecimal values to the printer. This is useful when you want to send a control code.

Command ^IHEX,xx

Arguments

^IHEX,

The Hex Command

xxThe hexadecimal value to send to the printer (00 - FF).

45

Page 45
Image 45
Tally Genicom 6600 manual Lines Per Inch, Dump Mode, Hex Command, Half Space Font Mode