ProForm 831.293230 How To Move The Treadmill, even surface, How To Lower The Treadmill For Use

Models: 831.293230

1 19
Download 19 pages 29.69 Kb
Page 12
Image 12
HOW TO MOVE THE TREADMILL

HOW TO MOVE THE TREADMILL

Before moving the treadmill, convert the treadmill to the storage

position as described above. Make sure that the frame is se- curely held by the latch pin.

1.Hold the upper ends of the handrails. Place one foot on the base as shown.

2.Tilt the treadmill back until it rolls freely on the front wheels.

Carefully move the treadmill to the desired location.

To re-

duce the risk of injury, use extreme caution while mov-

 

ing the treadmill. Do not move the treadmill over an un-

 

even surface.

 

3.Place one foot on the base, and carefully lower the treadmill until it is resting in the storage position.

HOW TO LOWER THE TREADMILL FOR USE

1.Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Pivot the treadmill down until the frame is past the latch pin. Slowly release the latch knob.

2.Hold the treadmill firmly with both hands, and lower the tread- mill to the floor. Do not drop the treadmill frame to the floor. To decrease the possibility of injury, bend your

legs and keep your back straight.

Base

Front Wheels

Engaged

Latch Knob

Frame

12

Page 12
Image 12
ProForm 831.293230 How To Move The Treadmill, Carefully move the treadmill to the desired location, even surface