ProForm 831.293230 user manual Assembly, rubber mallet, wire cutters, while tightening it

ASSEMBLY

Assembly requires two persons.Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrenches		and your own phillips screwdriver	,
rubber mallet	, wire cutters	, and needlenose pliers	.

To identify small parts during assembly, use the PART IDENTIFICATION CHART in the center of this manual.

1.Make sure that the power cord is unplugged.

With the help of a second person, carefully raise the Uprights (11) until the treadmill is in the position shown.

2.Insert one of the Extension Legs (62) into the treadmill as shown. (Note: It may be helpful to tip the Uprights

[11]in the direction shown by the arrow as you insert the Extension Leg.) Make sure that the Base Pad (40) is in the indicated position. Attach the Extension Leg with

an Extension Leg Screw (9).	Make sure to push on the
head of the Extension Leg Screw	while tightening it.

Attach the other Extension Leg (62) in the same way.

1

11

2

11

9

62

40

5