Philips DVDR 75 manual CConnecting additional devices, Connecting an additional video recorder

CConnecting additional devices

You can connect additional devices such as decoders, satellite receivers, camcorders, etc. to the

S-VIDEO IN , Video in , IN COMPONENT VIDEO and the IN L AUDIO R , IN AUDIO LR jacks on the recorder. Switching between jack S-VIDEO IN and Video in is done

automatically. In case both jacks are occupied, the signal at jack S-VIDEO IN is given priority.

Can I also connect other devices with 'Progressive scan'?

The IN COMPONENT VIDEO jacks are only	used for 'interlaced'
signals. Signals using progressive scan cannot be processed by the DVD		?
recorder.

Connecting an additional video recorder

You can also connect a video Recorder to the input jack. Please use the S-VIDEO IN jack and the IN L AUDIO R jacks for SVHS video recorders.

Please be aware

Most pre-recorded video cassettes and DVDs are copy protected. When you attempt to copy them, the '￿￿￿￿ ￿￿￿￿' message will appear in the DVD Recorder display.

aWhen copying video cassettes '￿￿ ￿￿￿￿￿￿' appears in the

DVD Recorder display

b Check whether the cable plugs fit correctly.

b If the recording is made from a video recorder, adjust the "tracking" on the video recorder.

b In case of bad, non-standard video input signals, the DVD Recorder may not be able to detect the signal.

aWhen copying from DVDs or pre video cassettes, the
picture is grainy and the brightness fluctuates.
b This occurs when you attempt to copy copy-protected DVDs	or
video cassettes. Although the picture on the TV is OK, the recording
is distorted on a DVD+R(W). Copy-protected DVDs and video		Problem
cassettes cannot be copied without these disruptions.

18 Connecting additional devices