Philips DVDR 75 manual Programming a recording Timer, Change AM/PM, Changing the recording mode

5Confirm with OK .

aThe following message appears on the screen: 'Please enter

channel number'

b The channel number of the TV channel has not yet been assigned to
the PlusCode number. Using C , D or the number buttons 0..9 on
the remote control, select the corresponding channel number (name)
of the TV channel and confirm with OK .
aThe following message appears on the screen: 'PlusCode
number wrong'
b The entered PlusCode number is incorrect. Repeat your entry or
cancel using the SYSTEM-MENUbutton.
b Check the time/date (see 'Setting the time & date' in 'Installing your
DVD recorder').
aThe following message appears on the screen: 'Date does not
match Mon-Fri'
b A daily recording was entered for the wrong day. Daily programming	Problem
can only be used for recordings to be made from Monday to Friday.

6The decoded data appears after confirmation. You can go back and change the data. Select the appropriate input field with C or D . Change the information with D , C or the number buttons 0..9 .

Change 'AM/PM'
Use the SELECT button to select 'AM' or 'PM' in the input fields
'Start' and 'End'.
Changing the recording mode
Select 'RecMode' using C .	Tip
Using CH- B , select the recording mode 'M1, M2, M2x, M3, M4, M6'.

7If all information is correct, press the OK button. The information is stored in a TIMER block.

8To end, press TIMER .

9Insert a recordable disc in the Recorder. The disc is checked.

10 Switch the Recorder off with STANDBY m .

The programmed recording will only function properly when the DVD Recorder has been switched off using the STANDBY m button.

If any of the TIMER blocks are in use, 'TIMER' will light up on the display.

Timer
VCR Plus+ system			Rec
Date Ch.	Start	End	Mode
01/22 001	08:30AM	10:00PM	M1

To store

Press OK

ENGLISH

Programming a recording (TIMER) 61