Philips DVDR 75 manual Connecting with a S Y/C cable

Use the supplied audio (cinch) cable and plug one end into the red/white cinch jack OUT L AUDIO R at the back of the DVD Recorder (next to S-VIDEO OUT ) and the other into the corresponding red/white audio input jack of the TV (usually called Audio in', 'AV in'. See your TV's instruction manual).

Connecting with a S (Y/C) cable

This connecting cable, also known as the SVHS cable, is used to transmit the brightness signal (Y signal) and color signal (C signal) separately. This mini DIN jack/plug is also called a Hosiden jack/plug.

Have the following cables ready:

an antenna cable (1, supplied), a power cable (2, supplied), a S-video (SVHS) cable (3), an audio cable (4, supplied with red/white ends).

1

2

3

4

Remove the antenna cable plug from your TV. Insert it into the ANTENNA IN jack at the back of the DVD recorder.

Insert one end of the supplied antenna cable into the TV OUT jack at the back of the DVD Recorder and the other end into the antenna input jack at the back of the TV.

Use a S-Video (SVHS) cable and plug one end into the S-VIDEO OUT jack at the back of the DVD Recorder and the other end into the S-Video (SVHS) In jack of the TV (usually called S-Video in or SVHS in. See your TV's instruction manual).

5Switch on the TV. Then switch the set to the SVHS input jack or select the corresponding channel number. For the channel

number, please see your TV's instruction manual.

6Connect the mains jack 4MAINS at the back of the DVD Recorder with the power supply using the supplied power cable.

The most important features of the DVD Recorder will appear on the display.

After the initial installation is completed, this function will be switched off. How you switch on this function again, read in the chapter 'User preferences' in the section 'Standby'.

14 Connecting the DVD Recorder