Philips DVDR 75 manual Messages on your DVD Recorder display

Messages on your DVD Recorder display

The following messages may appear on your DVD Recorder display. If you name a disc, the disc		￿￿￿￿￿￿￿
name will appear on the display panel as well.
￿￿ ￿￿ ￿￿￿	The DVD Recorder is currently in the initial installation mode. Switch
	on your TV and read section 'Initial installation' in chapter 'Installing
	your DVD recorder.'
￿￿ ￿￿￿￿￿￿	No signal or poor signal strength
￿￿￿￿	The on-screen menu display is on.
￿￿￿￿￿￿￿	Disc tray is opening.
￿￿￿￿ ￿￿￿￿	Disc tray is open.
￿￿￿￿￿￿￿	Disc tray is closing.
￿￿￿￿￿￿￿	Disc is being read.
￿￿￿￿ ￿￿￿￿	After a successful recording, the list of disc contents is updated.
￿￿￿￿ ￿￿￿￿	After the first recording has been successfully completed on a new disc,
	the menu structure is created.
￿￿￿￿ ￿￿￿￿	The DVD/video cassette you are trying to copy is copy protected.
￿￿￿￿	Please wait until this message disappears. The DVD Recorder is busy
	processing another operation.
￿￿ ￿￿￿￿	No disc has been inserted. If a disc has been inserted, then it is possible
	that the disc cannot be read.
￿￿￿￿	Information on the inserted DVD is displayed on the screen.
￿￿￿￿	The DVD Recorder is busy making changes DVD-compatible.
￿￿￿￿￿￿￿	Entire disc is being erased.
￿￿￿￿￿￿￿￿￿	Inserted disc is new or has been completely erased (no recordings
	present).
￿￿￿￿￿￿￿￿￿	Disc cannot be recorded on.
￿￿￿ ￿￿￿￿￿	The maximum number of titles has been reached for the disc. Each disc
	can have a maximum of 48 titles.
￿￿￿ ￿￿￿￿	The maximum number of chapters per title/disc has been reached. The
	maximum number of chapters per title is 99, and 124 per disc.
￿￿￿￿ ￿￿￿￿	Disc is full. There is no room for new recordings.
￿￿￿ ￿￿￿￿	A disc with PAL recordings has been inserted and an attempt was made
	to record an NTSC signal. Insert a new disc or use a disc containing
	NTSC recordings.
￿￿￿￿ ￿￿￿￿	A disc with NTSC recordings has been inserted and an attempt was
	made to record a PAL signal. Insert a new disc or use a disc containing
	PAL recordings.