29
Manually setting the time & date
If the time is incorrect, this could be due to a weak or disrupted TV signal. If this is the case,
switch off the automatic function.
1Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2Select 'A' using Dor C.
3Select line 'Installation' using CH- Bor CH+ Aand confirm
with C.
4Select line 'Time/Date' using CH- Bor CH+ Aand confirm
with C.
5Select 'Manual' with CH- Bor CH+ A.
6Confirm with OK .
Time/Date
Manual
Time 09:02
AM/PM AM
Year 2003
Month 01
Date 01
DaylightSaving Off
To exit press
SYSTEMMENU
7Change the time in line 'Time' using the number buttons 0..9 on
your remote control.
8Check 'AM/PM', 'Year', 'Month', and 'Date' in the same way.
To select between the fields, use CH- Bor CH+ A.
Change the information with D,Cor the number buttons
0..9 .
9Select one of the following settings in line 'Daylight Saving':
'On': The time set corresponds to the summer time (summer
time is on)
'Off': The time set corresponds to the winter time (summer time
is off)
10 When all settings are correct, confirm with OK .
11 To end, press SYSTEM-MENU .
If the setting has been confirmed with OK the automatic system is disabled.
ENGLISH
Installing your DVD recorder