Philips DVDR 75 manual Connecting with Video Cvbs cable

7	Press STANDBY/ON m on the recorder. '￿￿ ￿￿ ￿￿￿' will
	appear on the display.

Then, read the paragraph 'Initial installation' in the chapter 'Installing your DVD recorder'.

Connecting with Video (CVBS) cable

This cable, usually featuring yellow cinch plugs, is used for transmitting the Composite Video signal (FBAS, CVBS). In this method of transmission the color signal and the brightness signal are transmitted on the same cable. Under certain circumstances, this may lead to problems with the picture, such as 'Moiré' patterns.

Have the following cables ready:

an antenna cable (1, supplied), a power cable (2, supplied), a video (CVBS) cable (3, supplied, with yellow ends), and an audio cable (4, supplied, with red/white ends).

1Remove the antenna or cable TV signal from your TV. Connect it to the ANTENNA IN jack at the back of the DVD recorder.

2Insert one end of the supplied antenna cable into the TV OUT jack at the back of the DVD Recorder and the other end

into the antenna input jack at the back of the TV.

3Use the supplied video (CVBS) cable and plug one end into the yellow jack OUT VIDEO (CVBS) at the back of the DVD

Recorder and the other end into the Video In jack (usually yellow) of the TV (usually called Video in or AV in. See your TV's instruction manual).

4Use the supplied audio (cinch) cable and plug one end into the red/white cinch jack OUT L AUDIO R at the back of the DVD Recorder (under to Video in ) and the other into the

corresponding red/white audio input jack of the TV (usually called Audio in', 'AV in'. See your TV's instruction manual).

5Switch on the TV. Then switch the TV to the Video/Audio input jack or select the corresponding channel number. For the channel

number, please see your TV's instruction manual.

ENGLISH

Connecting the DVD Recorder 15