Philips DVDR 75 JProgramming a recording Timer, Programming a recording with the VCR Plus+ system

JProgramming a recording (TIMER)

General

Use programmed recording (TIMER) to automatically start and stop a recording at a later date.

The DVD Recorder will switch to the right channel and begin recording at the correct time. With this DVD recorder, you can pre-program up to 6 recordings within a period of one year.

To make a programmed recording, your DVD Recorder needs to know:

*the date of the recording

*the channel number of the TV channel

*the start and stop time of the recording

*the recording mode ('M1/M2/M2x/M3/M4/M6')

This information is saved in a TIMER block.

Before you begin, make sure the clock is set. If the clock is not set, the 'Time/Date' menu will appear when you press the TIMER button.

Programming a recording with the 'VCR Plus+® system'

Thanks to this programming system, you no longer need to tediously enter the date, TV channel, start and end times. All the information needed for programming is contained in the PlusCode programming number. This 8-digit PlusCode number is found in most TV listings for magazines.

1Switch on the TV. Select the channel number for the DVD Recorder (channel 3 or 4 or the Audio/Video In channel).

2With the Recorder on, press TIMER on the remote control. The programming method selected last is marked.

3Select line 'VCR Plus+ system' using CH- B or CH+ A and confirm with C .

4Enter the entire PlusCode number. This number is up to 9 digits long and can be found next to the start time of the TV program

in your TV listings magazine. e.g.: 5-234-89 or 5 234 89

Enter 523489 for the PlusCode number.

If you make a mistake, you can clear the entry with CLEAR .

Selecting daily/weekly recordings
Using SELECT , select from the following options:
'Mo-Fr': Repeated daily recordings from Monday to Friday.	Tip
'Weekly': Repeated weekly recordings (every week on the same day).

Timer

VCR Plus+ system

PlusCode number

- - - - - - - - -

Mo-Fr/Weekly	To store
Press SELECT	Press OK

60 Programming a recording (TIMER)