9251758_6275i_1_en_au_oth_v1.0.fm Page 53 Tuesday, August 22, 2006 10:24 PM

Assign a voice tag to a command

Before using voice commands, you must first add a voice tag to the device function.

1.Select Menu > Settings > Voice commands.

2.Select the device function you want to tag: Profiles, Messages, Infrared, Voice recorder, or Log.

3.If necessary, select an option associated with that function.

4.Select Start, and speak the voice tag clearly into the microphone. Do not select Quit unless you want to cancel the recording.

The device replays and saves the recorded tag. appears next to commands with assigned voice tags.

Activate a voice command

After you have associated a voice tag with a function in your device, to issue a command, speak the voice tag.

1.In standby mode, press and hold the right selection key or voice key.

2.With Speak now displayed, pronounce the voice tag clearly into the microphone.

With the voice tag found, the device displays Found:, and plays the recognised voice tag through the earpiece. The function you requested is activated.

S e t t i n g s

Options

After you have associated a voice tag to a command, you can select one of the following options:

Play—Press the center selection key to listen to the voice command tag.

Change—SelectOptions > Change to change the voice command.

Delete—SelectOptions > Delete to erase the voice command tag.

Connectivity

You can connect the phone to a compatible devices using infrared (IR) connection, or Bluetooth wireless technology. You can also connect the phone to a compatible PC using IR or a USB data cable; and use the phone as a modem to enable connectivity from the PC.

For more information, see the Nokia PC Suite online help. Nokia PC Suite

and all related software can be downloaded from http://www.nokia-asia.com/pcsuite.

Important: Only install and use applications and other software from sources that offer adequate security and protection against harmful software.

53

Page 63
Image 63
Panasonic 6275I manual Connectivity, Assign a voice tag to a command, Select Menu Settings Voice commands