Set up your phone
9
■Connect the headset
A compatible headset, such as HS-5,
may be included with your phone or
purchased separately as an
enhancement. See “Enhancements”,
p. 58.
1. Plug the headset connector into
the Pop-Port™ connector at the
bottom end of your phone.
appears on the display.
2. Position the headset on your ear.
With the headset connected, you can
make, answer, and end calls as usual.
Use the keypad to enter numbers.
Press the call key to place a call.
Press the end key to end a call.
You can also plug a compatible
headset into the 2.5-mm stereo
headset jack on the side of your phone
to allow hands-free operation.
See“Enhancements”, p. 58.
Warning: When you use the
headset, your ability to hear
outside sounds may be
affected. Do not use the
headset where it can
endanger your safety.
■Make calls
1. Enter the phone number.
For international calls, press * twice
for the international prefix (the +
character replaces the
international access code) and
then enter the country code,
the area code without the leading
0, if necessary, and the phone
number.
2. To call the number, press the call
key.
3. To end the call or to cancel the call
attempt, press the end key.
To make a call using names, search for
a name or phone number in Contacts.
Press the call key to call the number.
To access the list of up to 20 numbers
you last called or attempted to call,
press the call key once in standby
mode. To call the number, select a
number or name, and press the call key.
9251758_6275i_1_en_au_oth_v1.0.fm Page 9 Tuesday, August 22, 2006 10:24 PM