Panasonic 6275I manual Security level, Access codes, Change security code

9251758_6275i_1_en_au_oth_v1.0.fm Page 60 Tuesday, August 22, 2006 10:24 PM

S e t t i n g s

Restrict sent calls—Set restrictions on making calls.

Restrict rcvd. calls—Set restrictions on receiving calls.

4.Select whether to block or allow numbers:

Blocked numbers—Set the numbers the phone can only block, allowing all the rest.

Allowed numbers—Set the numbers the phone can only call or receive, blocking all the rest.

5.Select one of these options: Select, Add restriction (unavailable with memory full), Edit (unavailable with no number added), or Delete (unavailable with no number added).

Note: With restricted calls, you may still call the official emergency number programmed into your device.

Security level

Your device can be set to different security levels to control device use and memory settings. In standby mode, select Menu > Settings > Security > Security level. Enter your security code, and select OK and one of the following options:

None—Disable security level protection.

Memory—Enable or disable memory protection.

Phone—Enable or disable phone protection.

Access codes

You can change your security code and PIN code. Avoid using codes similar to emergency numbers such as 911 to prevent accidental dialling of the emergency number.

Change security code

The security code controls access to features such as the security level and is supplied with the phone. The preset code is 12345. When you change the security code, keep the new code secret and in a safe place, separate from your phone

If you enter the wrong security code five times in succession, you will not be able to enter a code for 5 minutes, even if you power off the phone between incorrect entries.

1.In standby mode, select Menu > Settings > Security > Access codes > Change security code.

2.Enter the current security code (default is 12345), and select OK.

3.Enter the new security code (up to 10 characters), and select OK.

4.Enter the new security code again, and select OK.

60