Messages
28
For example, if you pause for 5
seconds after connecting to voice
mail, enter p twice (two times 2.5
seconds) after the voice mailbox
number: 2145551212pp.
5. Enter any remaining pauses or
other information that enables you
to listen to your messages,
and select OK.
6. Enter a name (such as voice mail),
and select OK.
To dial and listen to your voice mail,
press and hold the assigned speed
dialling key in standby mode.

Insert dialling codes

Press* repeatedly to cycle through
dialling codes. When the desired code
appears in the display, pause briefly,
and the code is inserted into the
dialling string.
The following dialling codes are
available:
*—Bypasses a set of instructions
p—Pauses for 2.5 seconds before
sending any numbers that follow
+—Replaced by the international
access code
w—Waits for you to press the call key
before sending the numbers or codes
thatfollow

Clear voice mail icon

To clear the voice mail icon from the
display, select Menu > Messaging >
Voice messages > Clear voice msg. icon.
Web messaging
Web messaging is a network service.
See “Network services”, p. viii.
If your network operator supports this
feature, you can use the minibrowser
to check for e-mail messages.
Select Menu > Messaging > Browser
msgs. > Connect.
Important: Exercise caution
when opening messages.
E-mail messages may contain
malicious software or
otherwise be harmful to your
device or PC.
9251758_6275i_1_en_au_oth_v1.0.fm Page 28 Tuesday, August 22, 2006 10:24 PM