specifications
Analogue Audio Output
Digital to Analogue conversion | 2x Burr Brown |
Signal to noise ratio | 110dB CCIR |
Harmonic distortion (1kHz) | 0.0008% (20Hz — 20kHz, unweighted) |
Frequency response (+0.1dB, | |
Output level (0dB) | 2.2Vrms |
Output impedance | 47Ω |
Minimum recommended load | 5kΩ |
Digital interfaces |
|
USB | Class 1 |
| Class 2 USB 2.0 High Speed (480 Mbit/s) |
AES/EBU | Up to 192kHz sample rate |
Coaxial S/PDIF x 2 | Up to 192kHz sample rate |
Optical S/PDIF (TOSLINK) x 2 | Up to 96kHz sample rate |
Physical |
|
Dimensions | W433 x D370 x H110mm |
Weight | 6.2kg nett/10.0kg packed |
Power consumption | 30W maximum |
Analogue output connection | RCA Phono x 2 |
| Balanced XLR |
Supplied accessories |
|
| Mains lead |
| CR107 remote control |
| 2 x AAA batteries |
E&OE |
|
NOTE: All specification values are typical unless otherwise stated
Radio interference
The D33 DAC is a digital device which has been designed to very high standards of electromagnetic compatibility.
All DACs generate, and can radiate RF (radio frequency) energy. In some cases this can cause interference with FM and AM radio reception. If this is the case, keep the DAC and its connecting cables as far from the tuner and its aerials as possible. Connecting the DAC and the tuner to different mains sockets can also help to reduce interference.
EC COUNTRIES – This products have been designed to comply with EMC Directive 2004/108/EC.
USA – These products comply with FCC Part 15 Class B.
Continual improvement policy
Arcam has a policy of continual improvement for its products. This means that designs and specifications are subject to change without notice.
