Panasonic 6275I Voice commands and voice tags, Start-up tone, Help text activation, Set length

9251758_6275i_1_en_au_oth_v1.0.fm Page 52 Tuesday, August 22, 2006 10:24 PM

S e t t i n g s

Off—Used to turn off tones. No tones are sent when you press a key.

Set length

You can specify DTMF-tone length for the Fixed option. In standby mode, select Menu > Settings > Phone > DTMF tones > DTMF tone length > Short (95 ms) or Long (350 ms).

Start-up tone

You can select to have a start-up tone when you first turn on your device.

In standby mode, select Menu > Settings > Phone > Start-up tone > On or Off.

Help text activation

Your device displays brief descriptions for most menu items. When you arrive at a feature or menu, pause for about 14 seconds, and wait for the help text to be displayed. If necessary, use the scroll key to page through the full help text.

The default setting for help text is On. However, you can turn help text on or off. In standby mode, select Menu > Settings > Phone > Help text activation.

■Voice commands and voice tags

Before using voice tags, note the following:

•Voice tags are not language-dependent, but depend on the speaker’s voice.

•You must say the name exactly as you said it when you recorded it.

•Voice tags are sensitive to background noise. Record voice tags, and use them in a quiet environment.

•Very short names are not accepted. Use long names, and avoid similar names for different numbers.

Note: Using voice tags may be difficult in a noisy environment or during an emergency, so you should not rely on voice dialling in all circumstances.

Hands-free operation

You can set as many as 16 voice commands to enable hands-free operation of certain features in your device.

52