74 | 4 Configuring the system |
14Install the chassis cover. For instructions, see “Installing the Chassis Cover.”
15Plug all peripheral devices and the AC power cable back into the server.
Removing a PCI Riser Connector
The PCI riser connector can be replaced if it fails or if a different option is required. To replace the PCI riser connector, use the following instructions to remove it, and then follow the instructions under “Installing a PCI Riser Connector” to install a new riser connector.
NOTE: To eliminate the possibility of installing the replacement connector on the wrong side of the PCI riser assembly, replace one connector at a time.
1Observe the safety and ESD precautions at the beginning of this book. See “Safety Information.”
2Power down the server and unplug all peripheral devices and the AC power cable.
3Remove the chassis cover. For instructions, see “Removing the Chassis Cover.”
