140 | 5 BIOS setup |
3Move the jumper from the normal operation position, Password Clear Protect, at pins 2 and 3 to the Password Clear Erase position, covering pins 1 and 2 as indicated in the following diagram.
4Reconnect the AC power, power up the system.
5Power down the system and disconnect the AC power.
6Return the Password Clear jumper to the Password Clear Protect position, covering pins 2 and 3.
7Close the server chassis.
8Reconnect the AC power and power up the server.
Clearing the CMOS
If you are not able to access the BIOS setup screens, the CMOS Clear jumper will need to be used to reset the configuration RAM. The CMOS Clear jumper is located on jumper block J1H5.
