
64 | 4 Configuring the system |
18Install the chassis cover. For instructions, see “Installing the Chassis Cover”
19(Optional) Install the front bezel. For instructions, see “Removing and Installing the Front Bezel.”
20Plug all peripheral devices and the AC power cable back into the server.
Removing a Floppy Drive from the Converted Hard Drive Bay
1Observe the safety and ESD precautions at the start of this book.
2Power down the server and unplug all peripheral devices and the AC power cable.
3Remove the chassis cover. For instructions, see “Removing the Chassis Cover.”
4Remove the front bezel if it is installed. For instructions, see “Removing and Installing the Front Bezel.”