3

Product briefing

This section provides basic information concerning the configuration of your Altos R510 system.

Processor

Single or dual Intel® XeonTM processors with 800 MHz FSB

CPU Hyper-ThreadingTMTechnology support

Supports Extended memory 64bit technology (EM64T)

Memory subsystem

Six (184 - pin) DIMM slots

DDR-1 333 MHz registered memory modules supported

Maximum upgrade - 12 GB

2-way memory interleaving supported

SDDC (Single Device Data Correction) for memory error detection and correction of any number of bit failures in a single x4 memory device

Memory sparing technology

When memory sparing is enabled, the spare DIMM will not be detected by OS

The sparing DIMM will be reserved for standby purposes and cannot be accessed by the system1

Please refer to page116 "Memory Configuration Sub-menu Selections" for more information about configuring the memory sparing in the BIOS Setup utility

1For example, if six 1GB DIMMs are installed (6 GB memory) only 4GB of memory (in DIMM 1B, 1A, 2B, 2A) can be accessed by the system. Memory in DIMM 3B and DIMM 3A would be reserved as spare DIMMs

Caution! When using multiple memory modules it is recommended that you AVOID using modules from different manufacturers or that run at different speeds from each other.

Page 15
Image 15
Acer Altos R510 manual Product briefing, Processor, Memory subsystem