Acer Altos R510 manual

75

4Lift up on the two blue levers to lift the PCI riser assembly from the chassis.

5Remove any PCI add-in cards that are installed in the connector. For instructions, see “Removing a PCI Add-in Card.”

6Push back on the blue release lever at the end of the riser connector. While holding the lever back, push firmly on the other edge of the board to disengage the board from the riser.

7Follow the steps under “Installing a PCI Riser Connector” to install a replacement riser connector.

8Install the chassis cover. For instructions, see “Installing the Chassis Cover.”