80 | 4 Configuring the system |
8Slide the board to the right until it stops. Do not pull on any components on the board – grasp only on the edges of the board. See letter “B” in the figure.
9Lift the backplane from the chassis. The holes in the backplane will slide from the matching pins in the chassis. If any of the pins catches on the holes, it means you have not slid the board fully to the right. See letter “C” in the figure.
C |
A |
B
Installing the SCSI or SATA Backplane
1Observe the safety and ESD precautions at the beginning of this book. See “Safety Information.”
2Power down the server and unplug all peripheral devices and the AC power cable.
3Remove the chassis cover. For instructions, see “Removing the Chassis Cover.”
4Remove the air baffle. For instructions, see “Removing the Air Baffle.”
