COMPLETE THE INSTALLATION

Stuff the wires into the junction box. Make sure none of the wires get pinched.

Model 4193 Glass Installation

Slide the fixture onto the

 

mounting screws and

Junction

tighten nuts.

Box

Install one 100Watt maximum light bulb, or three 60 Watt bulbs in candelabra style.

Install the fixture top. Secure with decorative screws.

After completing the tests on page 5, caulk fixture mounting surface with silicone weather sealant.

Corner

Guides

Rubber Bumpers

Model 4193 only: install the six pieces of glass by sliding them down as shown. The glass panels should rest upon the corner guides on each side, and against the rubber bumpers at the bottom.

Note: As with any glass, handle with care.

595-5628-08

Page 5
Image 5
Heath Zenith SL-4190 Series manual Complete the Installation, Model 4193 Glass Installation