Heath Zenith SL-4190 Series manual Installation, Mode Switching Summary, DualBrite Dimmer Control

Mode Switching Summary

	TEST	ON-TIME Switch at 1,
			5, or 10 minutes
	AUTO			Flip light
				switch off for
				one second
MANUAL MODE
				then back on*

*If you get confused while switching modes, turn the power off for one minute, then back on. After the calibration time the control will be in the AUTO mode.

DualBrite® Dimmer Control

Light comes on half bright for selected time af- ter dusk (Off, 3 hr., 6 hr., until dawn).Selecting OFF disables this feature.The motion sensing features will continue to work as described in this manual. If motion is sensed, the light turns on full bright for the ON-TIME (1, 5, or 10 minutes) then returns to dim mode.

INSTALLATION

For best performance, mount the fixture about 6 feet (1.8 m) above the ground.

WARNING: Turn power off at circuit breaker or fuse.

1. Remove	2. Remove
two nuts.	X-Bar.

3. Tighten screws	SENSITIVITY
finger tight.	MIN	MAX

4. Set sensitivity on fixture back to the mid-position.

5. Attach X-Bar to

junction box

Junction

Box

Due to the size and weight of the fixture, you may find it helpful to have an assistant hold the fixture in place while connecting the wires.

595-5628-08