Heath Zenith SL-4190 Series Testing, Least Sensitive, Maximum Range, Avoid aiming the control at

TESTING

❒Turn on the circuit breaker and light switch.

NOTE: Sensor has a 1 1/2 minute warm up pe- riod before it will detect motion.When first turned on, wait 1 1/2 minutes.

Note: Meets the ENERGY STAR® guidelines when DualBrite® function is off.

❒Switch the on-time to TEST position and DualBrite® switch to the OFF position.

TEST 1 5 10 MIN	OFF 3 6 DUSK TO
ON-TIME	HOUR DAWN

Avoid aiming the control at:

•Objects that change temperature rapidly, such as heating vents and air condition- ers. These heat sources could cause false triggering.

•Areas where pets or traffic may trigger the control.

•Nearby large, light-colored objects reflecting light may trigger the shut-off feature. Do not point other lights at the sensor.

The detector is less sensitive to motion di- rectly towards it and more sensitive to across motion.

MotionMotion

Sensor

Least Sensitive Most Sensitive

❒Walk through the coverage area noting where you are when the lights turn on.

❒If you need to change the sensitivity, temporarily remove the fixture and make the adjustment. Too much sensitivity may increase false triggering.

❒Set the amount of TIME you want the light to stay on after motion is detected. (1, 5, or 10 minutes).

❒Set the amount of time after dusk you want the lights on accent level.

6 ft.	180°
(1.8 m)

30ft.

(9.1 m)

Maximum Range	Maximum
	Coverage Angle

595-5628-08