Heath Zenith SL-4190 Series manual Motion Sensing Diecast Lantern, Operation, SL-4190Series, Test

Motion Sensing

Diecast Lantern

SL-4190 Series

Meets the ENERGY STAR® guidelines when DualBrite® function is off.

Features

•Light comes on when motion is detected.

•Automatically turns light off.

•Dusk Accent lighting.

•Photocell keeps the light off during daylight hours.

This package includes:

OPERATION

Mode:	On-Time	Works: Day	Night
Test	5 Seconds	x	x
Auto	1, 5, or 10 Min		x
Manual	To Dawn*		x
Accent	3, 6 Hr, to Dawn		x

* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Set the ON-TIME switch
on the bottom of the
cover plate to TEST.	TEST 1	5 10	MIN
AUTO
Set ON-TIME switch to
1, 5, or 10 minutes.
	TEST 1	5 10	MIN

MANUAL MODE

•Lantern

•Easy to use universal mounting bracket (X-Bar)

•Mounting hardware

•Wire nuts

Requirements

•The light control requires 120 volts AC.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

Manual mode only works at night because daylight re- turns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and

MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1Second OFF then...

... back on.

© 2007 HeathCo LLC 595-5628-08