00356A SID-600P-eng 12/10/02 12:14 PM Page 14

 

 

 

 

 

 

 

 

Preparing Cables

Installing the Camera

 

 

 

 

 

 

 

The following cables are required to install and use the Camera.

For installing directly on a ceiling

Power Adapter Cable

EThe power adapter that plugs into the Camera’s power input receptacle has the rated volt- age of DC 12V 600mA or AC 24V 300mA.

Video Cable

The cable that connects the video output terminal of the Camera to the monitor is a BNC cable.

1.Choose an installation site that can sufficiently support the weight of the equip- ments to be installed.

2. Attach the supplied template to the installation site, drill pilot holes (5 mm diam

E

eter, min. 35 mm depth), and then install and secure the supplied plastic

 

 

anchors (HUD 5).

 

3.Connect the power cord and video cable, and arrange them so that they will not be damaged or caught when installing the CAMERA.

4.Remove the DOME COVER to install the CAMERA.

1)Use the supplied L WRENCH to unfasten the 4 BOLTS for CASE fixing by turning them counter- clockwise as shown in the illustration.

2)Disassemble the ASSY-DOME in the direction shown in the illustration.

5. Install the CAMERA.

Align the CAMERA’s installation holes to the holes where the PLASTIC ANCHORS are inserted and then fasten the ASSY SCREW- TAPPINGS (TH M4 X 30) with O RINGS.

(2 spots) (It will not be waterproof without O RINGS.)

1)

2)

14

15

Page 8
Image 8
Samsung SID-600P manual Preparing Cables Installing the Camera, For installing directly on a ceiling, Power Adapter Cable