GE JGB920, JGB910 owner manual Installing the Anti-Tip Device, When All Hookups Are Completed

Models: JGB910 JGB920

1 64
Download 64 pages 49.5 Kb
Page 51
Image 51

Read these instructions completely and carefully.

Installing the Anti-Tip Device

WARNING:

Range must be secured with an approved Anti-Tip device.

Unless properly installed, the range could be tipped by you or a child standing, sitting or leaning on an open door.

After installing the Anti-Tip device, verify that it is in place by carefully attempting to tilt the range forward.

This range has been designed to meet all recognized industry tip standards for all normal conditions.

The use of this device does not preclude tipping of the range when not properly installed.

If the Anti-Tip device supplied with the range does not fit this application, use the universal Anti-Tip device WB02X7909.

Mark the wall where the RIGHT EDGE of the range is to be located. Be sure to allow for the countertop overhang if you intend to install the range next to cabinets.

Anti-Tip device

Slotted head screw

Wallplate

Approx. 20°

2

⁄ ”

Marked edge of range

 

1 8

Using the device as a template, mark the position of the hole for the screw.

For wood construction, drill a pilot hole at an angle of 20 degrees from the horizontal. A nail or awl may be used if a drill is not available.

Mount the Anti-Tip device with the screw provided.

For cement or concrete construction, you will need a 1/4″ x 112″ lag bolt and a 1/2″ O.D. sleeve anchor, which are not provided. Drill the recommended size hole for the hardware.

Wallboard

Back of range

Anti-Tip device

Wood screw

Install the sleeve anchor into the drilled hole and then install the lag bolt through the device. The bolts must be properly tightened as recommended for the hardware.

Slide the range against the wall, and check for proper installation by grasping the front edge of the cooktop and carefully attempting to tilt the range forward.

Safety Instructions Operating Instructions Installation Instructions

Locate the outside edge of the device 218″ toward the center of the range from the marked edge of the range.

When All Hookups Are Completed:

MAKE SURE ALL CONTROLS ARE LEFT IN THE OFF

MAKE SURE THE FLOW OF COMBUSTION AND

POSITION.

VENTILATION AIR TO THE RANGE IS UNOBSTRUCTED.

Converting to LP Gas (or converting back to natural gas from LP)

Troubleshooting Tips Customer

This range leaves the factory set for use with natural gas. If you want to convert to LP gas, the conversion must be performed by a qualified LP gas installer.

The conversion instructions, sticker and LP orifices can be found attached to the range next to the pressure regulator.

There is a second set of instructions included in the envelope containing the product wiring diagrams on the back of the range. Keep these instructions and the orifices in case you want to convert back to natural gas.

51

Service

Page 51
Image 51
GE JGB920, JGB910 owner manual Installing the Anti-Tip Device, When All Hookups Are Completed, Troubleshooting Tips Customer

JGB910, JGB920 specifications

The GE JGB920 is a top-of-the-line gas range that embodies advanced features and modern cooking technologies, making it a favorite among culinary enthusiasts and home cooks alike. One of its standout characteristics is the powerful stainless steel construction, which not only delivers a sleek and professional look but also ensures durability and easy maintenance.

One of the primary features of the GE JGB920 is its convection oven, which uses a fan to circulate hot air, providing even cooking results for all dishes. This technology is especially beneficial for baking, as it aids in creating consistent browning and prevents hot spots. Additionally, the oven boasts a generous capacity, allowing users to prepare multiple dishes simultaneously or accommodate larger roasts.

The JGB920 also features a variety of cooking modes, including bake, broil, and even specialized settings like a self-cleaning function. This feature automates the cleaning process, using high temperatures to eliminate food residues, thus simplifying post-cooking cleanup.

The range is equipped with a precise temperature control system, allowing for accurate adjustments for various cooking methods. The integrated electronic ignition ensures a reliable start-up, while the gas burners provide responsive heat adjustment, enabling users to achieve the desired cooking temperatures efficiently.

Another significant aspect of the GE JGB920 is its Smart technology capability. By connecting to a home network, users can control the range remotely via a smartphone app. This feature allows for preheating the oven or adjusting cooking settings from the comfort of another room, adding convenience to the cooking process.

The cooktop itself is designed with versatility in mind. It offers multiple burner sizes, including a powerful high-heat burner for boiling and a simmer burner for delicate sauces. This flexibility meets various cooking demands, from searing to simmering, enhancing the range's overall functionality.

Safety is also a priority in the design of the GE JGB920. The range includes a variety of safety features, such as a gas safety valve and a child lock, ensuring peace of mind for families.

In summary, the GE JGB920 gas range successfully combines innovative cooking technologies with user-friendly features and a stylish design. Its convection oven, smart technology integration, and versatile cooktop options make it an excellent choice for any kitchen, elevating the cooking experience to new heights.