68 | 4 Configuring the system |
A
B
12Install the chassis cover. For instructions, see “Installing the Chassis Cover.”
13(Optional) Install the front bezel. For instructions, see “Removing and Installing the Front Bezel.”
14Plug all peripheral devices and the AC power cable back into the server.
Removing a
1Observe the safety and ESD precautions at the beginning of this book. See “Safety Information.”
2Power down the server and unplug all peripheral devices and the AC power cable.
3Remove the chassis cover. For instructions, see “Removing the Chassis Cover.”
4Remove the front bezel if it is installed.
5Disconnect the
6Push in on the blue lever at the rear of the drive carrier. Slide the drive carrier out through the front of the chassis.
7Press downward on the side of the carrier release the drive from the drive carrier.
