Be aware that coming out of this mode, if any variables are out of range by going into a mode that conflicts with these settings, the channel/channels will be set back to the default values.
Figure 6 Example 1: Divide by N Mode
Figure 7 Example 2: Divide by N Mode
Burst Mode
In Burst Mode, a set number of pulses (the burst packet) are output from OUT1. Each burst packet is sent at the packet frequency. The burst packet will start ONE period of the burst packet frequency after the rising edge of the packet frequency (OUT 2 will ALWAYS output the packet
Page 15
© 2004 Directed Energy, Inc.
