20
TV Aspect
Selects the aspect ratio of the connected TV (4:3
standard or wide).
[4:3] Select this when connecting to a 4:3 screen
TV. When you select [4:3], set [Display Mode]
below.
[16:9] Select this when connecting to a wide-screen
TV or TV with a wide mode function.
Display Mode
Selects how to display a wide picture on the screen
when [4:3] is selected in [TV Aspect].
[Letter Box] Displays a wide picture with bands on
the upper and lower portions of the screen.
[Pan Scan] Automatically displays a wide picture on
the entire screen and cuts off the portions that do
not fit.
Progressive Scan
Progressive Scan Video provides the highest quality
pictures with less flickering.
[ON] :Using the COMPONENT VIDEO OUT/
P/SCAN jacks for connection to a TV or
monitor that is compatible with a progres-
sive scan signal.
[OFF] :Using the COMPONENT VIDEO OUT/
P/SCAN jacks, but are connecting the
Recorder to a standard (analog) televi-
sion.
Caution
Once the setting for Progressive Scan output is
entered, an image will only be visible on a
Progressive Scan compatible TV or monitor. If you
set Progressive Scan to [ON] in error, you must reset
the Recorder. First, remove any disc in the Recorder.
Next, press STOP (x) and hold it for five seconds
before releasing it. The video output will be restored
to the standard setting, and a picture will once again
be visible on a conventional analog TV or monitor.
PBC
PBC stands for Playback Control and refers to spe-
cial menus and navigation features that are available
on some Video CDs.
[ON] Video CDs are played according to the PBC,
if available.
[OFF] Video CDs are played the same way as
Audio CDs.