3.2.1 ID Number Menu
SEE ID MENU SELECTION IN CONFIGURATION SECTION FOR ENABLE/DISABLE OR CHANGE ID CODE.
If ID Code is Disabled or set as Default (0000) the menu will skip ID step to Set Point Menu.
If ID Code is set to Full Security Level and user attempts to enter the Main Menu, they will be prompted for an ID Code.
If ID Code is set to Setpoint/ID Security Level and user attempts to enter the Configuration Menu, they will be prompted for an ID Code.
ENTERING YOUR NON-DEFAULT FULL SECURITY ID NUMBER.
Press a 1) Display shows ID.
Press d 2) Display advances to ____.
Press b & c 3) Press b to increase digit
Press d 4) If the correct ID code is entered, the menu will advance to the Setpoint 1 Menu, otherwise an error message ERRo will be displayed and the instrument will return to the Run Mode.
To change ID Code, see ID Menu in the Configuration section.
ENTERING YOUR NON-DEFAULT SETPOINT/ID SECURITY ID NUMBER.
Press a | 5) | Display shows SP1 Setpoint 1 Menu. | |
Press | a | 6) | Display shows SP2 Setpoint 2 Menu. |
Press a | 7) | Display shows ID ID Code Menu. | |
Press | d | 8) | Display advances to ____. |
Press b & c 9) | Use b and c to change your ID Code. | ||
Press | d | 10) If correct ID Code is entered, the display will advance to the | |
|
| INPT Input Menu, otherwise the error message ERRo will be | |
|
| displayed and the controller will return to the Run Mode. | |
To prevent unauthorized tampering with the setup parameters, the instrument provides protection by requiring the user to enter the ID Code before allowing access to subsequent menus. If the ID Code entered does not match the ID Code stored, the controller responds with an error message and access to subsequent menus will be denied.
Use numbers that are easy for you to remember. If the ID Code is
forgotten or lost, call customer service with your serial number to access and reset the default to 0000.
15
