Intel 550T Change the flow mechanism on a port, Flow Control, click the flow control you want

C H A P T E R 3 Standard Configuration

Changing the flow control	Flow control prevents the loss of frames during busy periods. To
on a port	change the flow mechanism on a port:
	Note This feature is over-ridden by disabling the flow control set-
		ting in Device Setup>Switching.
	1	Click the port you want to change.
	2	Select Port Setup.
	3	Click Port Mode.
	4	In Flow Control, click the flow control you want.
		Default uses the same flow control as specified in Device
		Setup.
	5	Click OK.

	Port Specific Spanning Tree
Purpose	You can:
	• View the Spanning Tree setups for the port

Changing the state of a port

•Specify whether STP (Spanning Tree Protocol) is enabled on the port

•Define which ports are going to be used most frequently

To specify that a port is using STP:

1Click the port you want to change.

2Select Port Setup.

3Click Spanning Tree.

61