Belkin F5D8235-4 Connections to Wired Computers, USB Port, Connection to Modem, Reset Button

Knowing your Router

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

K. Connections to Wired Computers

Connect your wired (non-wireless) computers to these ports.. These ports are RJ45, 10/100/1000 auto-negotiation, auto-uplinking ports for standard UTP category 5 or 6 Ethernet cable.. The ports are labeled 1 through 4..

L. USB Port

Plug in your USB storage device here..

M. Connection to Modem

This port is for connection to your cable or DSL modem.. Use the cable that was provided with the modem to connect the modem to this port.. Use of a cable other than the one supplied with the cable modem may not work properly..

N. Reset Button

The “Reset” button is used in rare cases when the Router may function improperly.. Resetting the Router will restore the Router’s normal operation while maintaining the programmed settings.. You can also restore the factory default settings by using the “Reset” button.. Use the restore option in instances where you may have forgotten your custom password..

i. Resetting the Router

Push and release the “Reset” button.. The lights on the Router will momentarily flash.. The “Power/Ready” light will begin to blink.. When the “Power/Ready” light becomes solid again, the reset is complete..

ii. Restoring the Factory Defaults

Press and hold the “Reset” button for at least 10 seconds, then release it.. The lights on the Router will momentarily flash.. The “Power/Ready” light will begin to blink.. When the “Power/Ready” light becomes solid again, the restore is complete..

O. Power Jack – Black

Connect the included 12V/1..5A

DC power supply to this jack..

(K)

(L)

(M)

(N)

(O)

N+ Wireless Router 10