Belkin F5D8235-4 user manual Can’t connect to the Internet wirelessly

Troubleshooting

Table of Contents sections 1 2 3 4 5 6 7 8 9 10

4.You may need to configure your Router to meet the specific requirements of your ISP.. To search our knowledge base for ISP- specific issues, go to: http://web..belkin..com/support and type in “ISP”..

If you are still unable to access the Internet after verifying these settings, please contact Belkin Technical Support..

•The Setup Assistant completed, but my web browser doesn’t work.

•I am unable to connect to the Internet. The “modem” LED on my Router is blinking, and the “internet” LED is solid.

1.If the “modem” LED is blinking, and the “internet” LED is solid, but you are unable to access the Internet, there may be third- party firewall software installed on the computer attempting to access the Internet.. Examples of third-party firewall software are ZoneAlarm, BlackICE PC Protection, McAfee Personal Firewall, and Norton Personal Firewall..

2.If you do have firewall software installed on your computer, please make sure that you properly configure it.. You can determine if the firewall software is preventing Internet access by temporarily turning it off.. If, while the firewall is disabled, Internet access works properly, you will need to change the firewall settings to function properly when it is turned on..

3.Please refer to the instructions provided by the publisher of your firewall software for instructions on configuring the firewall to allow Internet access..

If you are still unable to access the Internet after disabling any firewall software, please contact Belkin Technical Support..

I can’t connect to the Internet wirelessly.

If you are unable to connect to the Internet from a wireless computer, please check the following items:

1.Look at the lights on your Router.. If you’re using a Belkin Router, the lights should be as follows:

•The “router” LED should be on.

•The “modem” light should be on, and not blinking.

•The “internet” LED should be on, and not blinking.

•The “Wireless” light should be on, not blinking

2.Open your wireless utility software by clicking on the icon in the system tray at the bottom, right-hand corner of the screen..

3.The exact window that opens will vary depending on the model of wireless card you have; however, any of the utilities should have a list of “Available Networks”—those wireless networks it can connect to..

Does the name of your wireless network appear in the results?

Yes, my network name is listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, but my network name is listed”..

No, my network name is not listed—go to the troubleshooting solution titled “I can’t connect to the Internet wirelessly, and my network name is not listed”..

N+ Wireless Router 75