Intel 550T Port Mode, Switch. The MAC address of those devices are removed from, Able the port

C H A P T E R 3 Standard Configuration

	Port Mode
Disabling the port	If you disable the port, the devices attached to it cannot use the
	switch. The MAC address of those devices are removed from the
	switch’s address table. If those addresses are defined as permanent
	entries, they are not purged but are unable to use the switch. To dis-
	able the port:
	1	Click the port you want to disable.
	2	Select Port Setup.
	3	Click Port Mode.

4Click Enable Port.

If there is a check mark in the box, the port is operational. If the box is empty, the port is disabled.

5Click OK.

Disabling auto-negotiationTo disable auto-negotiation, and reset the speed to the values speci- fied in Speed:

1Click the port you want to disable auto-negotiation.

2Select Port Setup.

3Click Port Mode.

4Click Enable Auto-negotiation.

If there is a check mark in the box, the port automatically detects the line-speed and duplex setting. If the box is empty, auto-negotiation is disabled and the port uses the values speci- fied in Duplex and Speed.

5Click OK.

59