Intel 550T manual Before a switch is contacted

C H A P T E R 2 Intel Device View

	• Information section — provides details about diagnostics, traps,
	errors and the system. Using this window, you can show activity
	statistics for the switch (or the stack) and for individual ports.
	Before a switch is contacted
Basic menu bar	Before a switch or stack is contacted, the following commands are
commands	available through the menu bar. The toolbar buttons are for users us-
	ing Intel Device View in Windows.
File menu	This contains one command, Exit which enables you to exit the Intel
	Device View. When a switch or stack is open and the configuration
	has been changed and not saved to the Flash Memory as the perma-
	nent configuration, you are asked if you want to save the new config-
	uration before exiting.
Device menu	The Device menu contains the following switch commands:

•Install — enables you to install a new device, which does not

have an IP address, in Intel Device View. Can also be accessed by

selecting .

•Manage — enables a switch or stack that has an IP address already assigned to be managed or configured. Can also be

accessed by selecting .

•Discover — enables you to set up how the Device Tree discovers devices and users.

•A list of IP addresses — contains the last eight switches success- fully contacted from Intel Device View. These can be used to manage the switch.

View menu — for	The View menu allows you to customize the Intel Device View dis-
Windows users only	play to your own preferences: the Toolbar and Status Bar can be
	switched on and off.
Monitoring menu	This menu gives access to set the Default Preferences for Intel Device
	View, see “Setting the Preferences”, p. 23.

21